Step three: Install the optional or replacement booklet maker accessory
1.
If not already done, turn off the product and disconnect the power cord.
CAUTION:
Turn the product off, wait five seconds, and then remove the power cord before attempting
to service the product.
50
Chapter 2 Install and configure the finishing accessories
ENWW
2.
Attach the accessory to the product.
3.
Use the adjustment wheels on the accessory to align that accessory with the edge of the product.
NOTE:
If the accessory is not correctly aligned with the product, you might experience excessive paper
jams.
ENWW
Install or replace a stapler/stacker with booklet maker accessory for the HP LaserJet Enterprise M806
and HP LaserJet Enterprise flow MFP M830
51
4.
If you are installing an optional accessory for the first time, at the back of the product remove the
accessory interface cable cover.
5.
Connect the finishing accessory interface cable.
6.
Connect the product power cord, and then turn on the product.