Step two: Unpack the optional or replacement booklet maker accessory
Unpack the booklet maker from the packaging.
NOTE:
Remove all tape and packing material from outside the accessory. Open all doors and remove all
tape and packing material from inside the product.
48
Chapter 2 Install and configure the finishing accessories
ENWW
For recycling information, go to
www8.hp.com/us/en/hp-information/environment/product-recycling.html
.
NOTE:
HP recommends responsible disposal of the defective booklet maker.
1.
Remove all of the shipping tape from outside the accessory.
2.
Open the front door of the accessory, and then remove all of the shipping tape and packing materials
from inside the accessory.
Close the front door.
CAUTION:
Make sure that you remove all of the shipping material from inside the accessory.
ENWW
Install or replace a stapler/stacker with booklet maker accessory for the HP LaserJet Enterprise M806
and HP LaserJet Enterprise flow MFP M830
49
3.
Remove all of the shipping tape and packing materials from the output trays.
4.
Remove all of the shipping tape and packing materials from the booklet output tray.